What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

FACP FlexES Control FX2 (2 loops)

FX808392

Approval: VdS, CNBOP
VdS system authorization: S 209207

Basic set for assembly of a FACP with module slots and software support of 2 modules.

Features & Benefits
Technical Data
Accessories
Documents

Combinable loop/spur technology with decentralized intelligence
Freely configurable functionality of modules
4 free programmable potential free or monitored potential driving contacts and 1 output for alarm transmission unit (ATU)
Increased security and reliability via emergency mode function of the loop modules
Emergency mode for monitored areas up to 48,000 m² or more than 512 fire detectors acc. to the German Planning standard VDE 0833 and/or VdS 2095.
USB, Ethernet, 2 x RS 485, TTY interfaces onboard
Direct output of the proprietary EDP communications protocol (Data Protocol) via interface RS 485
Operation of loop-powered alarm signaling devices (optical/acoustic/voice) in different alarm zones via esserbus-PLus
Cascadable power supply up to 450 W according to EN 54-4
Loop length up to 3.5 km (esserbus)
Operation of different input/output gateways
Integrated interfaces for operation of required fire brigade periphery, e.g. fire brigade indicating panel, fire brigade operating unit
Event memory with 10,000 entries
Operation of VdS approved wireless components with convenient radio signal intensity measurement
Parameterization, calibration and programming directly via USB interface
Galvanic isolation of analog loops possible
Up to 1,000 control and detector zones

In connection with display and operating unit (Part No. FX808324)

Display and operating unit with 5.7" TFT display
Capacitive keyboard for touch-sensitive operation
Program-controlled night design with interactive, user-configurable keyboard menu

Additional features for powered loop

BUS supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 - 3 with alarm tone as per DIN 33404
Up to 48 powered loop base sounders (series 9200) per loop
Up to 8-64 powered loop IQ8Alarm+ per loop
Up to 48 IQ8Quad with alarm device per loop

Additional Information:

Optionally: display and operating unit (Part No. FX808324) or neutral front (Part No. FX808325) must be ordered separately.

Compatible serial printers FlexES: Part No. FX808353, FX808354, FX808353.INT, FX808354.INT

Max. two modules, up to two esserbus analog loops and expandable up to 127 loop devices (per loop) in mixed mode / loop powered and non-loop powered (system supports up to 254 digital loop addresses in total).

Scope of Delivery:

Basic set includes: 1 x power supply module, 1 x PS connection module, connection cable 0.6 m, 1 x rear panel 1, 1 x control module, 1 x housing frame and 1 x base module carrier, 1 x set air filter

Rated voltage VAC	230 V AC
Rated frequency	50 ... 60 Hz
Rated current	0.8 A
Output voltage	24 V DC
Quiescent current	approx. 192 mA (base model w/o display and operating unit) approx. 348 mA (base model with display and operating unit)
Current consumption for ext. devices	3 A
Battery capacity	2 x 12 V/12 Ah (max. 4 x 12 V/26 Ah)
Ambient temperature	5 °C ... 45 °C
Storage Temperature	-10°C ... 50°C
Air humidity	< 95 % (non-condensing)
Type of protection	IP 30
Housing	ABS, 10% glass fiber reinforced, V - 0
Color	gray, similar to Pantone 538
Weight	approx. 6.5 kg
Dimensions	W: 450 mm H: 320 mm D: 185 mm
Declaration of Performance	DoP-20903130701

Austria	German
Czech Republic	Czech
Poland	Polish
Romania	Romanian
Russia	Russian
Slovakia	Czech
Turkey	Turkish
Ukraine	Russian

Europe

Business

FACP FlexES Control FX2 (2 loops)

FX808392

Features & Benefits

Technical Data

Accessories

Documents