Conventional MCP electronic module

804950

Approval: VdS

With alarm indicator, for the connection to a standard detector zone.
  • Slimline design
  • Low power consumption
  • Plug-in connection terminals (two direction)
  • Optional terminal terminals
  • Triple key function (test, open, reset)
  • Detectors that are not ready for operation can be marked with the "Out of order" label by reversing the enclosed glass pane

Additional Information:
If the glass pane is replaced with the optionally available plastic pane with reset function, the MCP can be reset from the outside using the key. For the surface mounting of the MCP the surface mount base Part No. 704980 must be ordered separately, if the cable wasn't laid about a standard flush mount wall socket. Type a definition - single action in accordance with EN 54-11 § 3.4.1 (excerpt taken from EN standard): Manual fire alarm unit, for which the alarm status is automatically set (additional alarm triggering is not required) after the fragile element has been broken or its position has been changed.

Scope of Delivery:
1 x Glass pane 704960
1 x Multilingual paper labels with "Out of order" pictogram
Alarm displayLED, red and yellow flag
Alarm current @ 9 V DCtyp. 9 mA
Connection terminalmax. 2,5 mm² (AWG 26-14)
Application temperature-20 °C ... 70 °C
Operating voltage8 ... 30 V DC
Weight gapprox. 78 g
Storage temperature-30 °C ... 75 °C
No. of detector/zonemax. 10 detectors per loop (as per VdS)
Detector specificationEN 54-11, type A
Air humidity< 95 % (non-condensing)
Quiescent current @ 9 V DCapprox. 0 μA
Type of protectionIP 43 (in Housing), IP 55 with cover 704965
VdS-NrG 205131
DimensionsW: 88 mm H: 88 mm D: 57 mm (with surface mount housing)