- RF communication with up to 32 users
- maximum 32 wireless bases
- maximum 10 wireless interfaces with IQ8MCP manual call points
- maximum 10 control groups for wireless interface with IQ8Quad/IQ8Alarm alarm signaling devices
- esserbus integration of all RF devices as individually addressable users
- The RF devices can be assigned in up to 32 detector zones
- Alarm and fault transmission in accordance with EN 54-2
- Connection to esserbus of IQ8Control and FlexES Control panel as bus device as well as to a conventional detector zones
- Stand-alone operation
- Potential-free outputs for common fault and common fire
Additional Information:The external power supply of the IQ8Wireless transponder can come from the fire alarm control panel or from an external power unit.
The voltage for the wireless transponder can be supplied by the fire alarm control panel or an external power supply. An individual, separately protected supply line must be installed for the voltage supply. The external voltage supply is monitored by the wireless transponder. If the wireless transponder is installed as a device on the IQ8Control/FlexES Control, fire system, analog loop, a disturbance is transmitted to the fire detection control unit via the loop and is indicated there.